Filter
Top Products
26
Energy Saving Tips
• Do not install the appliance near boilers, radiators or other sources
of heat. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to
cool first.
• Do not leave the door open any longer than necessary.
• Do not set temperature any colder than necessary.
• Put frozen food in the fridge to defrost. The cold in the frozen food
will then be used to cool the fridge.
An accumulation of dust will affect the performance of the appliance
and cause excessive electricity consumption. The structure of the appli-
ance permits you to clean the rear zone close to the wall, using a vac-
uum cleaner.
☞
1. Remove the plinth (1), then the venti-
lation grid (2);
2. Carefully pull the air deflector out (3),
checking that there is no water left
from the defrosting.
S.I.013
3
21