Equator BB65 Dishwasher User Manual


 
Important - Take care when handling the dishwasher to avoid potential injury due to possibly
exposed sharp edges.
Unpack the Dishwasher
Remove carton and any internal packaging material from within the dishwasher.
Unclip the power cord, fill and drain hoses from the rear.
Carefully lay dishwasher on its back taking care not to damage hoses or power cord and
remove the wooden pallet by removing the 4 screws in the base.
Open the dishwasher door and remove the two screws securing the press-board top panel.
Preparation of the Cabinet
See below for dimensions of cabinet opening and dishwasher.
Connection points for electrical, water and drain lines must be situated in an adjacent
cabinet for easy access and within dimensional specifications.
The floor within the cabinet opening must be at the same height as the floor surface in the
surrounding room area.
Cabinet Opening Dimensions
Width 23 5/8" min. to 24" max.
Depth 22" min.
Height 32 3/8" min. to 34 5/8" max.
Connections
Electrical: Locate power outlet within 3' of the cabinet partition adjacent to the dishwasher.
Water: Locate water shut-off valve within 2' of the cabinet partition adjacent to the dishwasher.
Drain: Locate the drain line connection point within 1' of the cabinet partition adjacent to the
dishwasher.
Installation Instructions
17