Filter
Top Products
Upper Rack Height Adjustment
For your convenience, the upper rack can be
adjusted to two possible settings: High or Low.
HIGH Upper Rack Position: In this position, clearance
is maximized for larger items to be placed in the Lower
Rack.
LOW Upper Rack Position: In this position,
increased height is made available for tall glassware
and medium sized plates in the Upper Rack.
Loading the Dishwasher
Dishwasher Capacity: 12 standard place settings.
Remove leftover, bones and insoluble substances,
before placing into the dishwasher. You need not rinse
the dishes prior to loading them into the dishwasher.
The dishwasher provides an extremely high quality of
wash performance. In some cases, depending on
severity, it may be necessary to pre-soak certain items
that have burnt or baked-on food substances.
Position tableware according to the size, strength, and
dirtiness of the pieces.
Less dirty and delicate pieces such as glassware,
cups, dessert plates, china or crystal, are to be placed
in the upper rack with the open ends facing down.
Dirtier and more resistant pieces such as dinner
plates, pots, pans and serving dishes, are to be placed
in the lower rack. For a better wash, try to leave a small
amount of space between plates. When loading the
lower rack, ensure that the pieces are secure in their
position with the soiled surfaces facing down toward the
lower spray arm.
Silverware & Cutlery: Place these items in the
Silverware Basket located on the lower tray.
When all the dishes are in place, roll the upper & lower
racks back into the machine. Check to make sure that
the both the upper & lower spray arms move freely by
spinning them lightly with your hand.
Half load
If your dishwasher has a 1/2 button you can wash just
half a set of crockery (6 standard place settings) on the
upper rack.
To do this:
1. Select the wash program.
2. Press the 1/2 button on the control panel.
3. Place the crockery in the upper rack
Loading Diagrams
User Instructions
9
Adjusting the Upper Rack (MANUALLY)
To change the position of the Upper Rack, follow these
steps:
1. Pull the Upper Rack out to its extended position.
2. Twist the stoppers at the end of each runner to
the “open” position.
3. Pull the Upper Rack out further, removing it from
the runners.
4. Replace the Upper Rack onto the runners
introducing the alternate set of rack rollers to
the extended runners.
5. Once the rollers are in place, turn each stopper
to its original "closed" position.
Flexi-Rack
If your dishwasher is equipped with a flexi-rack upper
basket simply hold baket handles lift and lower to either
raise or lower basket.