Filter
Top Products
Remaining time display
The length of time the programme has left to run
will be clearly displayed in the text window, leaving
you in no doubt as to when the programme will end
and you can go out.
Delay timer function
This allows the start of the programme to be
delayed between 1 and 9.5 hours, enabling you to
benefit fully from cheaper electricity! Or just to be
nefit from the convenience of the programming
finishing when you want to.
Automatic adaption
The intelligentized control system could be
adaptive to different conditions of temperature,
voltage and humidity to automatically correct
remaining time display.
Error alarm
Fault codes display would inform the user of
abnormal status of the machine;
Memory function
The memory function could automatically set the
frequently used program as current program, it
make operation much more easier.
7 wash programs
You can choose your desired program according
to the soiled level. Such as, strong wash, normal
wash, economy, rinse, glass, rapid and pre-wash
etc.
Stainless steel tub
You need not warry about stain of tub.
Overflow protection
Your Midea dishwasher has an overfill protection
program which could automatically shut off the
inlet valve and start the drain pump if the water
Overflow.
LED low rinse aid Indicators
If the rinse aid are running low, there will be clearly
displayed on the panel alerting you to top them up,
to ensure that the machine continues to operate at
optimum performance.
Broad applied voltage
The broad scope of the applied voltage ,reduce the
code of electric condition.