Filter
Top Products
11
TOLL FREE: 1-877-646-5288
Fig. 1
Fig. 2
AssemblyandUseforthe64oz.Bowl
ASSEMBLY
WARNING: Never leave the appliance unattended while in use.
Fig. 3a
Fig. 3b
IMPORTANT: Make sure that the motor base
is plugged in for use.
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
2 Align and lower the Bowl onto the motor base.
(Fig. 1) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
3 Rotate the bowl clockwise as far as it will go to
lock in place. (Fig.2)
4 The bowl can be placed on the motor base
two ways; the handle can be on the front right
corner or the front left corner.
(Fig.3a,Fig.3b)
5 Holding the desired blade by the top of the
shaft, place it onto the drive gear inside the
bowl. Ensure that the attachment is seated
properly and is standing upright. (Fig.4)
NOTE: The blade will fit loosely on the drive
gear.
6 Add the ingredients to the bowl, making sure
that they do not exceed the highest measured
marking line on the side of the bowl.
7 Plug the power cord into the electrical outlet
and press the power button (
).
NOTE:Asasafetyfeature,thepower
button(
)willashandthemotorwillnot
workifthebowlandlidarenotinstalled
correctly.Whenthebowlandlidare
installedproperly,thepowerbutton(
)
willbesolid,indicatingthattheappliance
isreadyforuse.
8 Holding the lid by the handle in the upright
position, place it on top of the bowl aligning
the arrow (
) located on the lid with the arrow
(
) located on the bowl’s handle. (Fig. 5) Press
the handle down until you hear a click.
NOTE:The64oz.bowlisnotintendedfor
blendingdrinks.Donotoverll.
Fig. 4
Fig. 5
BL770_series_30_IB_ENG_120627_3.indd 11 12-06-27 11:55 AM