Euro-Pro BL770 Blender User Manual


  Open as PDF
of 24
 
15
TOLL FREE: 1-877-646-5288
PROBLEMS POSSIBLEREASONS&SOLUTIONS
MotorDoesn’tStartor
Attachment Doesn’t Rotate.
Make sure the container is securely placed on motor base.
Make sure the lid is securely on container in the correct position (align
arrows).
The appliance is turned “Off”. Press the power button (
) to turn “On”.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light
will remain on while speeds 1, 2 and 3 will flash. Unplug and wait
approximately 15 minutes before using again.
The unit has overheated. Unplug and wait approximately 15 minutes
before using again.
Check to make sure the unit is not overloaded.
FoodisUnevenlyChopped.
Either you are chopping too much food at one time, or the pieces are not
of even size and processing smaller amounts per batch.
FoodisChoppedTooFineoris
TooWatery.
The food has been over processed. Use pulse button for controlled
processing.
FoodCollectsOnLidorOnthe
SidesoftheContainer.
The mixture is to thick. Add more liquid.
YouCannotAchieveSnow
FromSolidIce.
Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.
MotorBaseWon’tStickto
CounterorTableTop.
Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.
DONOTattempttouseappliancewhenthemotorbaseisstuckto
asurfacethatisnotsecure,(cuttingboard,platter,plates,etc.).
TroubleshootingGuide
ReplacementParts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.
BL770_series_30_IB_ENG_120627_3.indd 15 12-06-27 11:55 AM
 previous next