Euro-Pro F1052 Fryer User Manual


 
1. Read all instructions carefully before
use.
2. Do not touch hot surfaces, always
use handles or knobs.
3. To protect against electrical shock, do
not immerse cord or plug in water or
other liquids.
4. Close supervision is necessary when
any appliance is used by or near
children.
5. Unplug from outlet when not in use
and before cleaning. Allow to cool
before putting on or taking off parts
and before cleaning the appliance.
6. Do not operate any appliance with a
damaged cord or plug, or after the
appliance malfunctions, has been
dropped or damaged in any manner.
Return the appliance to EURO-PRO
Operating LLC for examination,
repair or adjustment. (See warranty.)
7. Never plug in before unit is
assembled and before oil is added to
the oil reservoir.
8. Never overfill the fryer with oil. Fill
only between the minimum and
maximum levels, as indicated inside
the oil reservoir.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit into a polarized outlet only one
way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to modify the plug in any way.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be
followed, including the following:
9. Be sure the basket handle is
properly assembled to the basket
and locked in place. (See assembly
instructions.)
10. The use of accessory attachments
not recommended by the appliance
manufacturer may cause injuries.
11. Always insert heating element in the
appliance first, then plug into the
wall outlet. To disconnect, remove
plug from wall outlet then wait for
the unit to cool completely before
removing the heating element.
12. Extreme caution must be used
when moving any appliance
containing hot oil or other hot
liquids.
13. Do not leave appliance unattended
while in use.
14. Do not use outdoors.
15. Do not let cord hang over the edge
of the table, counter or touch hot
surfaces.
16. Do not place on or near a hot gas
or electric burner, or in a heated
oven.
17. Do not use appliance for other than
intended household use.
A detachable magnetic power cord is
provided to reduce the risk resulting
from becoming entangled in or tripping
over a longer cord. An extension cord
(or longer detachable cord) is not
recommended for use with deep
fryers.
Never plug in the unit to an electrical
outlet before the oil reservoir has been
filled with oil.
SPECIAL SAFETY INSTRUCTIONS
Do not immerse the deep fryer or the
power cord in water.
When opening the lid after frying, lift it
slowly and wait a moment to allow
the steam inside to escape before
opening fully.
To avoid a circuit overload, do not
operate another high wattage appliance
on the same circuit.
1 REV. 02/06A
8
OPERATING INSTRUCTIONS
Warning: Always remove the plug
from the wall socket before cleaning.
Allow the deep fryer and the oil to cool
completely (approximately 2 hours)
before cleaning. Never immerse the
control panel, cord or plug in water or
any other liquid.
Follow the cleaning instructions.
(Prior to First Use)
Never immerse the control panel, cord
or plug in water or any other liquid.
Do not place the control panel, cord or
plug in the dishwasher.
Clean the control panel only with a
damp cloth.
The oil container, frying basket, lid
cover and filter can be washed in the
dishwasher.
The body of the deep fryer can be
washed in warm soapy water. Do not
put the body of the deep fryer in the
dishwasher.
Cleaning Instructions
Detachable Power Cord
Your deep fryer has been specifically
designed with your safety in mind.
EURO-PRO has incorporated a
detachable power supply cord. This
power supply cord is designed to
“Break Away” from the fryer body in the
event that the supply cord is
inadvertently pulled. This is intended to
prevent the tipping of the appliance and
hazardous spilling of hot oil.
The female receptacle portion of the
power supply cord is permanently
attached to the rear of the control
panel.
To connect the male power cord plug to
the female receptacle on the appliance,
orient the male plug so that it mates
with the female receptacle. The male
plug can only be inserted one way. If
the male plug will not go into the
receptacle on the appliance, rotate the
male plug 180°.
IMPORTANT
: Should the male plug
become detached from the appliance
during use, it is important to:
1. Unplug the power cord from the wall
outlet.
2. Turn off the appliance at the control
panel.
3. Re-attach the power cord to the
appliance.
4. Re-connect to power outlet.
5. Turn the appliance back on.
Push the thermostat reset button
located on the back of the control
panel with the back of a ball point
pen. (Fig. 6) The unit will beep to
indicate that it has reset.
If for some reason the deep fryer stops
heating, the reason might be that the
safety reset switch has tripped. To
reset the the deep fryer, follow the
instructions listed below:
How To Reset the Deep Fryer
Reset
Button
Fig. 6