Filter
Top Products
GETTING TO KNOW YOUR
VARIABLE SPEED QUAD BLADE FOOD PROCESSOR
SPEED AND PULSE
CONTROL
Pulse Button
OFF to
MAX
Speed
Control
Dial
3
* Illustrations may differ from actual product.
1. Food Pusher
2. Feeder Tube
3. Food Processor Bowl
4. Suction Feet
5. Speed and Pulse Control
6. Blade Storage Compartment
7. Food Processor Lid
8. Blade Holder
9. French Fry Blade Holder
10. Thin Shredding Blade
11. Thick Shredding Blade
12. Thin Slicing Blade
13. Thick Slicing Blade
14. Grating Blade
15. Upper Chopping Blade
16. Blade Covers (x2)
17. Lower Chopping Blade
18. Spatula
Technical Specification
Voltage: 120V., 60Hz.
Power: 800 Watts
Food Processor Capacity: 6 cups (1.5 L)
Assembly Instructions
Before using your food processor for
the first time, do the following:
1. Read all the instructions in this
instruction manual.
2. Remove the unit from packaging.
Warning: BLADES ARE VERY
SHARP! Take extra care when
removing the protective blade
covers to prevent injuries.
Important Note: Always replace the
protective blade covers onto the blades
when the blades are not in use.
3. Wash the unit and attachments
according to the “Maintenance &
Cleaning” section. DO NOT
IMMERSE MAIN UNIT IN WATER.
4. Once the unit has been thoroughly
cleaned, it is ready for assembly
and use.
Assembling the Food Processor
The food processor can be used either
with both the upper and lower chopping
blades or just the lower chopping
blade. The food processor can also use
either of the blade holders instead of
the chopping blades.
Note: Before assembling the food
processor, ensure that it is NOT
plugged into an electrical outlet.
Assembling Both Chopping Blades
• Place the food processor bowl
securely on the main body. (Fig. 1)
• Once the food processor bowl is
securely in place, remove the
protective blade covers and carefully
assemble the upper and lower chopping
blades. (Fig. 2 & 3)
4
• After having assembled the chop-
ping blades, carefully place the
chopping blade assembly onto the
shaft of the food processor bowl.
(Fig. 4) Ensure that the blades are
securely in place before continuing.
FOOD
PROCESSOR
BOWL
MAIN BODY
Fig. 1
PROTECTIVE
BLADE
COVERS
Fig. 2
UPPER
CHOPPING
BLADE
LOWER
CHOPPING
BLADE
CAUTION!
BLADES
ARE
SHARP!
Fig. 3
FOOD
PROCESSOR
SHAFT
CHOPPING
BLADE
ASSEMBLY
Fig. 4