Euro-Pro FP86 Food Processor User Manual


  Open as PDF
of 6
 
Processing Examples
15 – 30 SECONDS8 – MAX24.5 oz / 700 gr.APPLES
10 – 20 SECONDS1 - 824.5 oz / 700 gr.LIQUIDS (SOUPS)
30 SECONDS6 - 824.5 oz / 700 gr.CARROTTS
15 – 30 SECONDS6 - 84 SLICESBREAD
15 - 30 SECONDS8-MAX21 oz / 600 gr. NUTS
15 - 30 SECONDS1 - 824.5 oz / 700 gr.FISH*
15 – 30 SECONDS4 - 824.5 oz / 700 gr.CHEESE
15 – 30 SECONDSMAXMAX 4 BUNDLESPARSLEY
15 - 30 SECONDS5 - 624.5 oz / 700 gr.ONIONS
15 - 30 SECONDSMAX24.5 oz / 700 gr.MEAT*
OPERATION TIMES
(used in 10 - 20 second intervals)
RECOMMENDED
SPEED
QUANTITYPRODUCT
Processing Examples with the Upper and Lower Chopping Blades
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
Hints & Tips for Chopping Blades
• Use both chopping blades for meats, fish, vegetables, cheese, etc. and have the
speed level set to “Max”.
• For finer chopping, increase the length of time you process. DO NOT exceed
processing times of more than 20 seconds per processing interval.
• For coarser chopping, use the “PULSE” button for a few seconds and monitor food
texture.
• Pre-cut larger pieces to make them fit into the feeder tube. When chopping hard
foods (e.g. meat, cheese) cut into 1-inch (2.4 cm) cubes.
Processing Examples for Blades
Recommended speed for processing with chopping blades is High.
Grating
(Hard
Cheeses)
French Fry
(Potatoes)
Thin
Slicing
(Carrots,
cucumbers,
raw potatoes,
lettuce)
Thick
Slicing
(Cabbage,
carrots,
onions)
Thick
Shredding
(Lettuce,
carrots,
onions, soft
cheeses)
Thin
Shredding
(carrots,
potatoes,
cucumbers,
cabbage,
soft cheeses)
Hints & Tips for Blades
• For shredding, place food horizontally into the feeder tube.
• For slicing, place the food vertically.
• If grating potatoes or apples, add 1 tsp of lemon juice to prevent them from turning
black. Potatoes can be sliced using the thin slicing blade for chips or use the large
french fry blade if making french fries.
7
Maintenance & Cleaning Instructions
Cleaning and Maintenance
Caution: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the “OFF”
position before inserting or removing
attachments.
• Never immerse the unit, cord or
plug in water or any other liquid.
• Clean the main unit with a damp
cloth only.
• Use extreme caution when
cleaning the chopping blade as
the blades are very sharp.
• All other parts can be cleaned in
warm sudsy water using regular
dishwashing liquid.
• If food has spilled over on to the
main unit, use the pointy end of the
spatula to clean the cracks and
crevices of the base under the food
processor bowl.
• The lid and protective blade guards
may be washed in lukewarm water
and a mild dishwashing liquid. DO
NOT place these in the dish-
washer.
Using the Storage Compartment
The food processor comes with a blade
storage compartment.
1. Press down and pull back on the
locking latch of the storage
compartment. (Fig. 11)
Locking
Latch
Fig. 11
8
2. Each blade is assigned a letter (A
through E) and has a slot
corresponding to that letter. Store
each blade in the corresponding
slot.
 previous