Filter
Top Products
Version 3/08 - Page 6
PLAN THE INSTALLATION
This rangehood can be installed as either ducted or ductless. When installed ductless, the rangehood vents out of a grate on the
back of the lower chimney. Ductless installations require a Ductless Conversion Kit, available from your dealer.
WARNING! BEFORE MAKING ANY CUTS OR HOLES FOR INSTALLATION, DETERMINE WHICH VENTING METHOD WILL
BE USED AND CAREFULLY CALCULATE ALL MEASUREMENTS.
The ductless Axia Isola chimney is
adjustable for varying ceiling heights as
indicated in FIGURE 5. The chimney can
between the bottom of the hood and the
cooktop (distance x in FIGURE 5).
upper
chimney
cover
ductless
lower
chimney
cover
canopy
cabinet base
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
1" min
7" max
31"
36”
FIGURE 5
DUCTLESS
DIMENSIONS
x
min & max ceiling height examples
x = 30"
min
4 5/8"
max
10 5/8"
x = 28"
min
2 5/8"
max
8 5/8"
x = 26"
min
5/8"
max
6 5/8"
x = 24"
min
10 5/8"
max
4 5/8"
DUCTLESS INSTALLATION DIMENSIONS
(not vented to the outside)
20"
2 5/8”
3 3/4”
WARNING
AND WEIGHT OF THIS
RANGEHOOD, THE
SUPPORT MUST BE
FIRMLY ATTACHED TO
THE CEILING. For plaster
or sheet rock ceilings, the
support must be attached
to the joists. If this is
not possible, a support
structure must be built
behind the plaster or sheet
rock. The manufacturer
assumes no responsibility
for injury or damage caused
by improper installations.
!