Filter
Top Products
English
Adjusting the racks
The racks can be
adjusted depending on
the load
The top rack can be
fitted at two different
heights so that different
size plates can be
washed.
In the high position, it is
possible to wash
standard 7 1/2 plates in
the top rack and 12 1/5
plates in the lower rack.
Fitting the top rack in the
low positions, it is
possible to wash 9 4/9
plates on top and 10 2/9
plates below.
a
Model A, top
rack:
It can be adjusted
without removing it
from its rails, even
with dishes already
on it. Both to raise
and lower its position,
you should pull the
rack up by holding on
to the side handles.
Make sure that both
sides are at the same
height; if not, level
them.
15
a
7
1/2
12
1/5
9
4/9
10
2/9