Filter
Top Products
PANELLING
WORKTOP
LEGS – LEVELLING
To install a built-in dishwasher:
4
INTEGRATION
If the worktop is made of
wood, fit plastic protection
over the worktop, which
prevents the vapors affecting
and damaging this area.
Fit the veneer to the front part
of the dishwasher in order to
fasten it to the piece of
furniture.
a
b
a
b
c
d
e
In order to build it into a line
of furniture with a single base,
loosen the extra bases and
remove them.
Bring it to the work top and
raise it by turning the rear feet
away from the front part
leaving a space of around 3
mm with the worktop.
To finish positioning, adjust
to desired height using the
front feet.
f
g
g
f
From the accessory bag
supplied with the dishwasher,
take the two panel adaptors,
fit them by sliding them along
the groove and fix them with
screws also found in said
bag.
Screw the panel cover
(supplied as an accessory)
to the panel adaptors,
adjusting to your desired
height.
e
d
c
d