Filter
Top Products
7
English
Please refer to the
specifications label on
the top edge of the door,
before making electrical
connections. Make sure
than the voltage sent to
the plug socket is the
voltage which appears
on the label.
The dishwasher requires
an earthed 120 V, 15
Amp, 60 Hz plug
socket.
The dishwasher is fitted
with a flexible power
cable, ending in a three
pin earth plug which
can be connected to a
socket.
The socket for the
dishwasher must be
located in a cabinet or
a wall next to the gap
under the worktop
where the appliance is
going to be installed.
Make a hole with
maximum diameter of 1-
1/2 “(38 mm) in the
cabinet wall through
which the plug and the
cable can be passed.
Instructions for the
edges of this hole:
Wooden cabinets: the
edge must be filed and
rounded.
Metal cabinets: request
a special eyelet to be
made by the service
workshop.
3
ELECTRICAL CONNECTION
When installing or
moving the dishwasher,
take care not to damage
the power cable.
It is very important that the dishwasher is connected to
earth. The electrical installation, plug, socket, fuses or
circuit breaker and meter must be capable of managing
the maximum power indicated on the specifications label.
If the power cable is damaged, it can only be substituted
by the manufacturer, After Sales Department, or authorized
personnel. In the event of insertion and integration, the
plug must be accessible after installation.
IMPORTANT
Inside the door, on the top edge, you will find the
specifications label. This label should never be
removed, as it gives information about the exact model
of the dishwasher, power supply, series number and
warranty.
IMPORTANT