Filter
Top Products
17
CONNECTION DIAGRAM
The radiant cooktop hotplate is supplied with a power cable.
If the power feed wire is damaged, it must be replaced by the manufacturer, by a designated
aftersales service or by authorized personnel for safety reasons.
It must be connected to the power supply with a plug that meets the EEC 7 publication or
with a multi-pole switch with a distance between the open contacts of a least 1/ 8 inch
(3mm).
Total power
Hotplate: VFA70=5,9 KW. VFA 78=7,3 KW
This device conforms to European directives 73/23/CEE and 89/336/CEE
VFA70 240V~ 29A 32 A
VFA78 240V~ 31A 32 A
Voltage Int.nominal Protection
by phases
PLATE