INSTALLATION INSTRUCTIONS FOR
CT560X, CT560C, CT5602F, CT2802, CT6552S,
& BICT600 SERIES COOKTOPS
IMPORTANT!
PLEASE MAKE THIS INFORMATION AVAILABLE TO YOUR JOINER AS IT
COULD REDUCE YOUR INSTALLATION COST.
CAUTION: In order to avoid a hazard these appliances must be installed
according to these Installation Instructions.
BEFORE YOU START
DO Ensure a suitable disconnection switch is incorporated in the permanent wiring,
mounted and positioned to comply with the Local Wiring Rules and Regulations.
DO Ensure the bench is square and level.
DO Use easy to clean finishes for the wall surfaces surrounding the Cooktop to aid
removal of any cooking fume staining resulting from use of the Cooktop.
DO Consult local building authorities and by-laws if in doubt regarding installation.
DO Ensure that the interconnection cord between the Cooktop and the Oven or control
Box is not accessible via cupboard doors after installation. This applies to any
extension cord as well, even though they are double insulated.
Note:
Ensure that there is a minimum of 60mm between the cutout and the rear
or side wall.
If the cutout is less than 100mm from the wall, some form of protection against heat
should be used, such as ceramic tiles.
If prolonged use is anticipated, or the cooktop is mounted above a drawer
space, a barrier between is recommended.
The CT560X should not be installed directly above a dishwasher as the humidity
may damage the electronics.