Filter
Top Products
Page 2
BUILT-IN OVEN INSTALLATION INSTRUCTIONS
1. Check that the kitchen cavity is square and within the limits in the INSTALLATION
DIMENSIONS.
2. Lift oven and slide into place. Secure Oven in cavity using 4 'wood screws' and washers
supplied through enamelled frame at either side of oven as shown in Flush Fitting
Installation Diagram.
3. Check that the Oven is firmly secured in the kitchen unit.
4. When installing the oven it is essential to centre the product in the cavity giving a spacing
of 2.5mm from the door edge to the joinery.
NOTE: If installing a Cooktop above the Oven ensure adequate clearance is provided for
the Cooktop as per the Cooktop Manufacturer's Instructions.
If installing a BI601 Single Built-In Oven with Wall Trim Kit, ensure you use
instructions that accompany that kit, Part No. 447915.
Cabinetry adjacent to ovens must have a minimum temperature rating of 90°C as stated in
AS/NZS 3350.2.6
Flush Fitting
Installation Diagrams