Filter
Top Products
9
Installation instructions
Parts checklist
Gas cooktop base unit
Literature pack (includes LP kit)
Elbow & blue washer (taped to power supply cable)
Regulator (in polystyrene)
Burner heads and caps (check polystyrene carefully before discarding)
3 x burner grates (1 x center, 2 x outer)
Accessories pack (GC365D only)
Tools needed
Phillips No. 2 screwdriver
Plumbing fittings as required
Woodworking tools as required
Shut-off valve
Oil based paint (for sealing cutout)
For GC365C LP conversion
Ø ⁄ “ x 1¾ ” (Ø2.5 x 45 mm) flat screwdriver
⁄” (7 mm) box spanner
For GC365D LP conversion
Ø ⁄ “ x 1¾ ” (Ø2.5 x 45 mm) flat screwdriver
Phillips No. 1 screwdriver
⁄” (7 mm) box spanner
⁄” (10 mm) ring spanner
US
CA
EN