Filter
Top Products
11
Installation instructions
Applying the seals
1
Turn the cooktop upside down and place it on a soft surface.
2
Spread the longer seal “A” around the left, rear and right sides (Fig. 3a).
3
Using a sharp cutter or a pair of scissors, cut the excess seal “C” and put aside (Fig. 3b).
4
Spread the seal “B” around the left, front and right edges of the cooktop (Fig. 3c).
5
Spread the seal “C” along the rear edge of the cooktop (Fig. 3d), making sure that the beginning and
the end overlap at the junctions with seal “B” (Fig. 3e).
Seal A
C
Seal B
FRONT SIDE
REAR SIDE
Seal A
Seal C
Seal B
Seal C
Fig. 3a Fig. 3b Fig. 3c
Fig. 3d
Fig. 3e