Filter
Top Products
9
Re-assembling the brass wok burner (some models only)
Each part of the brass burner has locating pins to help you to assemble it correctly after cleaning.
Incorrect assembly can cause dangerous irregular flames and ignition problems. See Figs. 11
and 12 for the correct assembly. Note: The brass parts of your wok burner will change colour
with use. This will have no effect on the performance. You can clean these with a brass cleaner.
Care and cleaning
Rotate vent ring to align
locating pin with hole in
burner base.
Inner cap
Outer cap (small holes)
Trim ring
Vent ring with locating
pins (large holes)
Align and insert
pin
Side view
Fig.12 Aligning locating pin with burner baseFig.11Positioning of locating pins