Filter
Top Products
20
3
1
750-882.5 mm
2
*
1
2
38 mm
max.
120
mm
750-882.5 mm
*
*
1
2
**
THERE ARE THREE DIFFERENT DRAINAGE OPTIONS. CHOOSE WHICH IS MORE SUITABLE.
CONNECT INLET HOSE TO HOT WATER SWITCH PRODUCT ON
22
23 24
34
If space is limited
for fixing, push
hose through drain
hose support to
required height
If space is limited
for fixing, push
hose through drain
hose support
to required height
Dishwasher using sink trap with drain hose joiner
29½ ”-34¾ ” (750-882.5 mm)
29½ ”-34¾ ” (750-882.5 mm)
min. R 8”
(200 mm)
min. R 8”
(200 mm)
min. R 8”
(200 mm)
1½ ”
(38 mm)
max.
4¾ ”
(120mm)
29 ½ ”-34 ¾ ”
(750-882.5 mm)
29 ½ ”-34 ¾ ”
(750-882.5 mm)
Supplied drain hose joiner
Ø ¾ ” (19 mm) waste tee
Ensure drain hose is routed straight
to joiner. Remove excess drain hose
material if necessary.
Do not shorten the inlet hose.
Important!
Ensure that drain connection
will comply with local plumbing
regulations.
Dishwasher and Standpipe Ø 1½ ” (38 mm) Dishwasher using Air Break with Drain Hose Joiner
HIGHLOOP
min. 6”
(150 mm)
Ensure the
supplied
rubber
washer is
fitted inside
the coupling.
Tighten coupling with wrench.
180
o
No leaks!
1
23 23 23
2
37 ⁄”
(
950 mm)
Max.
height
to top of
Air Break
see
see
see