Filter
Top Products
1
2
1
3
3
optional
(x2)
MOVE INTO THE CAVITY SECURE THE DRAWER
SECURE THE DRAWER REFIT THE DRAWER
10 10
11 11
1 2 3
The product has three
pairs of fixing points:
Ensure the sound insulation is
repositioned correctly.
2
1
4
5
4
3
Before refitting the drawer,
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
Ensure the drawer clips on
both sides are reset.
Ensure the drawer is
now rotated
clockwise back.
optional
Ensure hoses and cord
are not kinked or twisted.
OPTIONAL
1
2
3
4
4
optional
max.
¾ ” (19 mm)
Open the drawer halfway.
Using a flat-bladed
screwdriver, prize the plastic
gray plug out of the trim
moulding.
Replace the plastic
gray plug back into
the trim moulding and
ensure the trimseal is
facing forward.
Repeat for all four brackets.
Using a small Philips screwdriver,
screw through the trim moulding,
securing the side mounting
bracket to the cabinetry. Do not
damage the rubber trimseal.
If top mounting
brackets are being
used, ensure they’re
securely fitted before
sliding product into
cavity.
max.
¾ ” (19 mm)
a pair of optional
brackets on the top
a pair of fixing
holes on the bottom
a pair of formed
brackets on the
chassis side
(2,1) -2- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:43 PM
(2,1) -2- 599754C DD24S TALL installA2 USCA.indd 15/4/09 2:34:43 PM