Filter
Top Products
23
Option adjustments
How to make option adjustments
FIRST
Enter Option adjustment mode:
1
Press the / button to turn power on. Open DishDrawer®.
2
Press and hold the / and / buttons for 5 seconds until one long beep sounds.
FOLLOW THE
STEPS BELOW
Rinse aid setting
Water softener
setting*
Auto power
option
End of wash
programme
beeps option
Closed drawer
option**
PRESS THE
PRE
BUTTON
TO SCROLL
THROUGH
OPTIONS
Prefinished
red / unlit
blue / unlit purple / lit blue / lit red / lit
Integrated
red / unlit
green / unlit orange / lit green / lit red / lit
MAKE AN
ADJUSTMENT
The current setting is shown on the wash programme
selector in red lights. If four red lights are lit, the option
selected setting is set to 4.
Press the
/
button to increase the setting.
Press the
/
button to turn the selected option
on or off.
SAVE
Press the / button to save the change.
EXAMPLE
Setting set to 4
On
Off
On
Off
On
Off
*
This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.
**
The option sequence will start again from the Rinse aid setting.
/////
/