Filter
Top Products
- 39 -
6.15 Slide Runner Replacement
6.15.1 Remove the Tub as per instructions 6.11
6.15.2 Bottom slide runners only. Remove the two large Philips head screws
securing the slide runner at the front. The backing plate that the
screws locate into may come loose. This does not matter. It can be
realigned on reassembly.
6.15.3 Tap the slide runner from underneath at the front. This will knock the
slide runner up and free from its location in the chassis.
Note: On the bottom lefthand slide runner the water valve
mounting bracket will come away as well. This will mean
the water and electrical connections will have to be
disconnected first.
6.15.4 The slide runner may now be pulled forward to release it from its
location in the rear of the chassis.
6.15.5 Refit in reverse manner.
6.16 Front Trim Replacement
6.16.1 The trim has to be removed by breaking the retaining clips.
6.16.2 This can be done by slipping a blade screwdriver between the trim
and the chassis and twisting the blade to snap the clips. Protect the
cabinet from chipping and remove the broken clips.
6.16.3 Line up the clips on the replacement trim with the holes in the chassis
and push home.
6.17 Sound Gasket Replacement
6.17.1 Remove the sound gasket by grasping it in the middle with your
fingers and pulling it out of the trim.
6.17.2 To refit, feed the ends of the sound gasket into the ends of the
trim slot.
6.17.3 Push the middle section of the sound gasket into the slot then work
the rest in.
6.17.4 Roll the sound gasket with a coin to get it even.