Filter
Top Products
12
Using your dishwasher
Notes:
We do not recommend opening the dishwasher door when a wash programme is running. If
you need to open the door, see ‘Pausing a wash programme’ for instructions on pausing and
resuming a wash programme. Take care when you open the door as there may be a rush of
steam.
90 seconds after starting a wash programme, the display will dim itself to save energy. If you
touch the
button, the display will return to its original brightness.
About the keylock feature
The dishwasher will automatically activate the keylock. This prevents children stopping the
wash programme during mid-cycle or someone accidentally touching a button.
Keylock is automatically activated 30 seconds after
a wash programme has been started.
the dishwasher has been turned on, even if no wash programme has been started.
a wash programme has finished, unless you open the dishwasher door or turn the dishwasher
off.
a wash programme has been paused or cancelled and the door has not been opened.
Notes:
Keylock is deactivated automatically when a wash programme has finished (when
END
is
displayed).
If you do not turn the machine off by pressing the
button, the keylock will be reactivated
after 30 seconds.
To deactivate the keylock manually
1
Press the
button.
TO CANCEL KEYLOCK
will appear on the display.
2
Press the
button again.
PRESS FOR 5 SECS
will be displayed.
3
Hold down the
button for five seconds, until the countdown finishes and
KEY LOCK
DEACTIVATED
appears on the display.
If you release the
button during the countdown, the keylock will remain activated.
4
Once the keylock has been deactivated, you can either pause or cancel a wash programme (see
instructions following).
Pausing a wash programme after the keylock has been automatically activated
1
Deactivate the keylock (see instructions above).
2
When the display shows KEY LOCK DEACTIVATED, press the button. The display will
show PAUSED and then PRESS TO CONTINUE.
Note: If your dishwasher has been paused for more than 30 seconds, you will need to deactivate
the keylock again before you can resume the wash programme.
3
Press the button again to resume the wash programme.