Filter
Top Products
27
1032
Care and cleaning
General
Clean your dishwasher regularly for best performance and
to reduce the risk of problems occurring.
Always disconnect the dishwasher plug from the power
outlet and turn off the water supply before cleaning.
Use a gentle household cleaner for the outside and the
door seals.
Clean the control panel only with a clean moist cloth.
Cleaning the filters
Clean the filters and spray arms regularly. Dirty filters will
have a negative effect on the cleaning results.
To remove the filters (Fig. 27)
1
Remove the lower basket from the dishwasher.
2
Twist the filter cylinder anticlockwise to unlock the
bayonet mechanism and pull it up and out .
3
Remove the main filter plate, as shown.
4
Press on the two tongues at the top of the cylinder and
remove the coarse filter from the micromesh filter.
5
Clean all three filters thoroughly under running water. Use
a brush if necessary.
6
Replace the main filter plate.
7
Reassemble the filter cylinder and place it back into the
hole in the main filter plate. Twist clockwise until it clicks
into place and the arrows on the cylinder and the main
filter plate align.
Cleaning the spray arms
We recommend cleaning the spray arms on a regular
basis, to remove food particles that may block
the nozzles.
To remove the spray arms (Fig. 28)
1
Remove the lower basket from the dishwasher.
2
Remove the lower spray arm by pulling it upwards, as
shown.
3
Loosen the locking nut of the upper spray arm by
twisting it clockwise and remove the spray arm by pulling
downwards, as shown.
4
Clean the spray arms under running water.
5
Replace the spray arms, ensuring that the locking nut of
the upper spray arm is fastened tight and the lower spray
arm clicks into place.
Fig. 28 Removing the spray arms
1031
2
2
3
3
4
Main filter plate
Tongues
Filter cylinder
Coarse filter
Micromesh filter
Lower spray arm
Upper spray arm
Locking nut
Fig. 27 Removing the filters