Filter
Top Products
13
Using your dishwasher
Cancelling a wash programme after the keylock has been automatically activated
1
Deactivate the keylock (see instructions above).
2
When the display shows KEY LOCK DEACTIVATED, press the button until
PAUSED is displayed.
3
Keep the button held down while the display counts down: CANCEL 5.. 4.. 3.. 2.. 1
4
When CANCEL appears on the display by itself, release the button.
The word CANCELLING will flash on the display for 45 seconds, followed by
CANCELLED and a short tune.
5
Now you may either turn the dishwasher off by pressing the button or press the button
to start a new wash programme.
Note: cancelling a wash programme before it is complete may result in detergent staying
in the machine and on the dishes.
Selecting a different language
Your dishwasher is preset to display its messages in English, but you can select from ten
additional languages if you wish to.
1
Enter the language selection menu
Make sure your dishwasher is turned on but there is no wash programme running.
Deactivate the keylock if necessary (see instructions above).
Open the door.
With the door open, press the button. The display will show LANGUAGE
SETTINGS.
Keep the button held down while the display counts down: LANGUAGE
SETTINGS 10..9........2..1
When the currently set language (eg ENGLISH) appears in the display, release the
button.
2
Select a different language
Scroll through the languages by re-pressing the
button.
When the display shows the language you want (eg ITALIANO) press and hold the
button for 5 seconds until STORED is displayed.
3
Exit the language selection menu
Turn the dishwasher off by pressing the
button.
Turn the dishwasher back on by pressing the
button.
Note: while the door is open, the keylock will not be activated and you will not be able to cancel
a wash programme.