Fisher & Paykel DW820 Dishwasher User Manual


 
16
Changing the pre-set options
End of programme beeps
The beeps at the end of each wash programme can be removed by following the steps below.
1
Press the POWER button to turn the Dishwasher off.
2
Press the ECO button and while holding down, press the START/PAUSE button and hold
together for approximately five seconds until you hear one short beep.
3
Release the two buttons and the “beeps” are now removed.
If you wish to re-instate the beeps at the end of the wash programmes, repeat the steps
above.