Filter
Top Products
31
Using your ice maker (Ice & Water models only)
Ice On/Off
Your ice maker is designed to automatically dispense ice until it
senses that the bin is full. So the more ice you use, the more it
makes. It is even clever enough to sense when there is no bin in
place to catch the ice and it will not dispense any ice.
First use
When you first turn your refrigerator on after installation, the
icemaker will be off. The light above the ICE ON/OFF icon will be off.
To turn your ice maker on press the button. The light above
the ICE ON/OFF icon will be illuminated when the ice maker is on.
Press and hold , and together for 4 seconds then
close the door(s). The ice tray will flip. Force another cycle. The ice
tray will flip and spill the water into the ice bin. Empty water and
replace bin.
Note: the ice tray will flip only once doors are closed.
If the bin is full of ice, inserted incorrectly or if all bins are
removed, the ice maker will not operate. When the bin is inserted
correctly the scoop will be on the right hand side of the bin for
models E402B, E442B, E522B, RF522W and RF522A and at the front
of the bin for models RF610A and RF540A (refer to Fig.24).
Once your ice maker is in operation, discard the first 3 harvests
of ice (8 ice cubes are produced per harvest). This will flush away
any impurities in the water line and ensure that you get the best
quality ice. We recommend that you also do this after vacations or
extended periods of not using ice.
We recommend that you turn the ice maker off if:
– The water supply is to be off for several hours, or
– The ice storage bin is to be removed for a period of time, or
– You are going on holiday/vacation.
Fig.24 Ice storage bin and
scoop in correct position
E402B, E442B, E522B
RF522A and RF522W
RF610A/RF540A
Fig.23 Turning ice maker on