Fisher & Paykel E402B Refrigerator User Manual


 
22
ActiveSmart
cleaning care – special features
Humidity Control System (where fitted)
Important!
When cleaning the shelf above the vegetable bins,
we recommend that you do not disassemble the
Humidity Control System from the shelf.
In the event that the humidity control lid (plastic
lid) and humidity slides become separated from the
glass shelf, follow these instructions to reassemble.
1
Turn shelf upside down.
2
To attach humidity slides onto shelf
front corners, fit bottom clips into shelf
front trim. Next, slide sideways towards
shelf until arm clips onto glass.
3
To attach humidity control lid – with
text facing you, align lid with front of
shelf. Hold lid vertically and fit front
end into retainer on shelf. Ensure lid
fits into retainer as well as underneath
humidity slides.
4
At the sides of the shelf, adjust
humidity slide tabs so that the plastic
lid is between the shelf and the tabs.
5
If clips on back of shelf are present,
fasten lid with rear clips. Ensure that
the cover is fully secure at front and
back of shelf.
Humidity Slides
Retainer
Fig.13 Humidity Control System cleaning