Filter
Top Products
11
Installation instructions
3. Ventilation and installation
To ensure adequate ventilation for your refrigerator and it’s correct operation see recommended
cabinetry dimensions below.
The appliance is intended to be placed against a wall with a free distance not exceeding 3”
(75 mm).
E522B RF201A
Cabinetry dimensions (including minimum air clearances) inches mm inches mm
A inside height 68 ¾ 1745 71¼ 1810
Flush with refrigerator chassis – full door rotation
B inside width 32 ¾ 830 37 940
C inside depth 24 ⁄ 620 24 ⁄ 620
Flush with refrigerator door – 90° door rotation (for full drawer/shelf access, the doors need to
be open past 90˚)
D inside width 32 ⁄ 835 37 ⁄ 950
E inside depth flush to curved door 26 ⁄ 675 –
F inside depth flush to flat door 27 ⁄ 690 27 ⁄ 690
Flush with refrigerator door – full door rotation
G inside width 37 ⁄ 950 46 ⁄ 1180
H inside depth flush to curved door 26 ⁄ 675 –
I inside depth flush to flat door 27 ⁄ 690 27 ⁄ 690
Minimum clearances
J side clearance ¾ 20 ¾ 20
K side clearance – hinge side flush with door – 90° rotation 1 25 1 25
L side clearance – hinge side flush with door – full rotation 5 ⁄ 140 5 ⁄ 140
M rear clearance (incl. evaporator tray) 1 ⁄ 30 1 ⁄ 30
N vent 2 50 2 50
EN