Fisher & Paykel OB90 Oven User Manual


 
30
Care and cleaning
Replacing the oven light bulbs
The oven light bulbs (12V/20 W halogen) have a very long life, but if you should need to replace
one, use only a replacement bulb purchased from your nearest Fisher & Paykel dealer and follow
these steps. Note: oven bulb replacement is not covered by your warranty.
1
Allow the oven to cool down, then turn
it off at the mains power supply (wall
switch).
3
Using a flat-head screwdriver, twist and
lift the retainer clip upwards to release the
glass cover. Hold the glass cover to prevent
it falling.
5
Hold the replacement bulb in a soft cloth
or tissue (touching the bulb will reduce its
life span) and insert it into the socket.
2
Remove any oven shelves that may get in
the way.
4
Carefully lift the glass cover out of the
retaining bracket in the back and pull out
the faulty bulb.
6a
Reposition the glass cover and twist the
retainer clip back in place.
6b
Turn the oven back on at the mains power
supply (wall switch).
OFF