Filter
Top Products
23
Clock and timer
Fig. 20 Clock display and control buttons
Buttons
Timer
Cooking time
End of cooking time
Manual position; and cancels the set program
Decreases the number shown on the display
or changes the volume of the beeps
Increases the number shown on the display
Illuminated symbols
AUTO - flashing - oven in automatic position but not set
AUTO - steady illumination - oven set for automatic cooking
- timer in operation
AUTO - flashing and timer beeping when you have set automatic cooking time -
program error (The time of day lies between the calculated cooking start and end
time.)
Setting the clock
When first connected, or after a power failure longer than 15 seconds, ‘0
.
00’ and AUTO will
flash on the display. To set the clock, press the
button and then the
and
buttons.
Note: changing the time will delete any automatic program.
Using the timer
You can use the timer at any time, even when the oven is not in use. The timer does not
turn the oven off.
You can set the timer for up to 23 hours and 59 minutes.
To set the timer, press the button briefly, then the
and
buttons to set the time you
want. After a few seconds, the clock will show the time of day with the
symbol in the
display.
To check the remaining time, press the
button.
To cancel the timer, press the button and then reset the time to ‘0
.
00’ by pressing the
button. Press the
button to turn the timer off.
When the time is up, the timer will beep. Press the button to turn the timer off.
Setting the timer volume
You can choose between three levels of volume for the timer beeps. To adjust the volume:
1 Check the clock is set and the timer is not running.
2 Press and hold the
button. The timer will beep.
3 Release the
button and re-press to hear the next level of volume. The last level selected
is stored.
Note: if the power to the oven is cut, then the beep volume will reset to the loudest level.