Filter
Top Products
7
Installation instructions
Levelling the cooker
Important!
Using the supplied adjustable feet is
MANDATORY. For safety reasons and to
ensure adequate ventilation, the cooker
chassis MUST NOT sit directly on the floor, a
plinth, or other support surface.
To fit the adjustable feet:
1
Rest the rear of the cooker on a piece of
packaging, exposing the base for fitting
the feet.
2
Screw the four feet to the cooker.
3
Stand the cooker and level it by
screwing or unscrewing the feet
with an adjustable spanner. Use the
supplied nuts if necessary, see Figs. 2b
and 2c.
Fig. 2a Fitting the adjustable feet
(supplied with the cooker in the feet kit)
0
+ 8
mm
+ 8 mm
+ 15 mm
Fig. 2c Use the supplied nuts for height
adjustments between 8 and 15 mm.
Fig. 2b Do not use the supplied nuts for height
adjustments between 0 and 8 mm.
OR60 MODELS