Filter
Top Products
20
Using the display options
Sabbath mode
In Sabbath mode alarms, lights and displays are deactivated.
Sabbath mode can be activated or deactivated by holding down
the
, , buttons for 4seconds.
Once in Sabbath mode:
The interior light will not turn on when the refrigerator isopened.
The door alarm will not operate.
The display will not be illuminated.
Electronic control panel will not work, only a small candle icon
(
)
will be displayed on the screen.
Note: if power is turned off the refrigerator will automatically continue in Sabbath mode once
power is restored. Sabbath mode will automatically de-activate after 80 hours.
User warnings
Your refrigerator is clever enough to diagnose its own problems. It will alert you when there is
afault.
Filter reset
The filter reset icon will appear when the water filter needs changing. This will flash when
dispensing water. To change the filter and reset the filter icon refer to pages 22 – 23.
Fault
In the unlikely event a fault occurs the icon appears on the front of the display and a fault
code will be displayed on the left in the
screen.
When the door is open the refrigerator fault alarm will sound. To silence this press any button on
the display.
Please take note of the fault code and contact our Customer Care Centre. Details of Customer
Care phone numbers can be found in the back of this book.
Fig.19 Fault code display
Fig.18 Sabbath mode