Filter
Top Products
24
Ice maker
Your ice maker is designed to automatically dispense ice until
it senses that the bin is full. So the more ice you use, the more
it makes. It is even clever enough to sense when there is no
bin in place to catch the ice and it will not dispense any ice.
First use
When you first turn your refrigerator on after installation, the
icemaker will be off.
To turn your ice maker on use the button to scroll to the
screen.
Use the
or button to turn the ice maker on or off.
Shows the ice maker is on.
Shows the ice maker is off.
Press together to force a cycle. The ice tray will flip.
Force another cycle. The ice tray will flip and spill the water
into the ice bin. Empty water and replace bin.
If the bin is full of ice, inserted incorrectly or if all bins are
removed, the ice maker will not operate. When the bin is
inserted correctly the scoop will be on the right hand side of
the bin for models E402B, E442B, E522B, RF522W and RF522A
and at the front of the bin for models RF610A and RF540A
(refer to Fig.23).
Once your ice maker is in operation, discard the first 3 harvests
of ice (8 ice cubes are produced per harvest). This will flush
away any impurities in the water line and ensure that you get
the best quality ice. We recommend that you also do this after
vacations or extended periods of not using ice.
We recommend that you turn the ice maker off if:
– The water supply is to be off for several hours, or
– The ice storage bin is to be removed for a period of time, or
– You are going on holiday/vacation.
Using your ice maker
Fig.23 Ice storage bin and
scoop in correct position
E402B, E442B, E522B
RF522A and RF522W
RF610A, RF540A
Fig.22 Turning ice maker on