Fisher & Paykel WD1001 Garbage Disposal User Manual


 
- 3 -
FISHER & PAYKEL WASTE DISPOSAL -
INSTALLATION INSTRUCTIONS
IMPORTANT
Before you start to install your FISHER & PAYKEL Waste disposal please read all of these
instructions carefully. This set of instructions is general: local building codes take precedence
over the instructions in this guide and your installation must conform to the building codes in your
area. Be sure to retain this set of instructions for future reference.
TOOLS REQUIRED FOR INSTALLATION
You may need the following tools and supplies when installing your disposer:
(ILLUSTRATION #1)
Pipe wrench Hacksaw Plumber’s Rod Phillips Screw Driver
Rubber Mallet Electrical Switch
(20 amp rating)