Filter
Top Products
49
11/ PROGRAMMING
EN
•
Cancelling a programme
Hold down the “Start/
CC
” button for a few seconds.
•
Stopping the appliance
When the programme has finished, press the “On/Off” button .
•
Setting the audible signal
The setting enables you to activate or de-activate the beep at the end of the programme.
— Access the setting by holding down “Set” juntil you hear a double audible signal (long beep). Select
your preference by pressing the “Delayed Start” button
:
- Beep activated : an audible signal is heard and the “End” light flashes. The screen shows
BBIIPP..
- Beep de-activated : no audible signal and the “End” light is unlit.
The setting is confirmed automatically after approximately 10 seconds.
EE
AA
FF
Press
DDCCSS
key to adjust the program according to dirty
mark of your dishes :
- Very dirty (
++
), or Dirty for
““IInntteennssiivv””
- Very dirty
(
++
),
or Not very dirty
(
--
)
for
““
NNoorrmmaall””
- Dirty or Not very dirty (
--
) for
““GGllaasssseess””
program.
• L’OPTION
“DCS”
DIRT SYSTEM CONTROL
BB
This option is available for all
«« IInntteennssiivv »» «« NNoorrmmaall »» «« GGllaasssseess »» pprrooggrraammss..
Dirty
DCS