5
Control Pad Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various functions of the oven as described below. Your model will
have one of the 2 controls shown. Refer to Figure 1 or Figure 2, depending on your model.
The oven can be programmed to:
• Bake normally
• Time bake
• Vari Broil
• Self-clean
START PAD—Push to activate
oven after oven functions are
set.
START INDICATOR LIGHT—
Flashes as a reminder to push
the START pad to activate the
oven.
TEMPERATURE CONTROL
KNOB— Operates the Variable
Broil, Bake or Self-Clean Cycle
modes when used with the
START pad. Cancels all oven
functions when the Temperature
Control knob is turned to OFF.
OVEN
INDICATOR
LIGHT—Glows
each time the
oven burner
(element) turns
on to maintain
the set oven
temperature.
PRE-HEAT & LOCK LIGHTS—The "PRE-HEAT" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven temperature.
The "LOCK" light will flash until the door locks (or unlocks fully)
when the self-clean cycle is in use. It glows constantly after the
door locks.
FEATURE INDICATOR LIGHTS—
These light to show which feature is
in use.
STOP TIME PAD— Used to set the
desired stop time for baking. Can
be used with BAKE TIME to
program a delayed bake cycle.
BAKE TIME PAD— Used to enter
the length of the baking time.
CLOCK PAD— Used to set the
time of day clock.
TIMER ON/OFF PAD— Used to set the
minute timer. The minute timer does not
start or stop cooking.
UP and DOWN ARROW
PADS— Used along with
the function pads to select
cooking time, stop time
(when programming an
automatic stop time), time
of day and minute timer,
and self-clean function.
Figure 2
OVEN
INDICATOR
LIGHT—Glows
each time the
oven burner
(element) turns
on to maintain
the set oven
temperature.
TEMPERATURE CONTROL
KNOB— Operates the Variable
Broil, Bake or Self-Clean Cycle
modes when used with the
START pad. Cancels all oven
functions when the Temperature
Control knob is turned to OFF.
PRE-HEAT & LOCK LIGHTS—The "PRE-HEAT" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven temperature.
The "LOCK" light will flash until the door locks (or unlocks fully)
when the self-clean cycle is in use. It glows constantly after the
door locks.
START PAD—Push to activate oven
after oven functions are set.
START INDICATOR LIGHT—Flashes as
a reminder to push the START pad to
activate the oven.
Figure 1