Filter
Top Products
11
Setting Oven Controls
To Set or Change the Temperature for Normal Baking
The oven can be programmed to bake at any temperature from 170°F to 550°F
(65°C to 287°C).
To Set the Controls for Normal Baking:
1. Push BAKE. " " appears in the display.
2. Within 5 seconds, push the UP or DOWN ARROW. The display will show
"350°F (177°C)." By holding the UP or DOWN ARROW, the temperature can
then be adjusted in 5°F (1°C) increments.
3. As soon as the UP or DOWN ARROW is released, the oven will begin heating
to the selected temperature. When the displayed temperature reaches the
desired baking temperature, the control will beep 3 times.
4. To cancel the baking function, push CANCEL.
To Change the Oven Temperature after Baking has Started:
1. If you are using the minute timer, push BAKE and make sure the bake
temperature is displayed.
2. Push the UP or DOWN ARROW to increase or decrease the set temperature.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when using the oven.
Before Setting Oven
Controls
ARRANGING OVEN RACKS WITH
5 RACK POSITIONS
To bake on 1 rack, place the rack on
position 3 or 4. To bake on 2 racks,
place the racks on positions 2 and 4.
Oven Vent Location
The oven vent is located below the
backguard. When the oven is on, warm
air is released through the vents. This
venting is necessary for proper air
circulation in the oven and good baking
results.
REMOVING & REPLACING
OVEN RACKS
To remove, pull the rack forward
until it stops. Lift up front of rack and
slide out. To replace, fit the rack
onto the guides on the oven walls.
Tilt the front of the rack upward and
slide the rack back into place.
Note: The oven function will not work
if the time of day clock is not set.
(Figure 2 Only)