Filter
Top Products
8
To Set the Clock
When the range is first plugged in or when the power supply
to the appliance has been interrupted, the display will flash
"12:00".
1. Press once (do not hold pad down).
2. Within 5 seconds press & hold the
or until the
correct time of day appears in the display.
Note: The clock cannot be changed during any timed
bake or Self-Clean cycle.
To Set the Minute Timer:
1. Press .
2. Press the to increase the time in one minute
increments. Press & hold the to increase the time
in 10 minute increments. The timer can be set for any
amount of time from 1 minute to 11 hours & 59 minutes.
Note: If the pad is pressed first, the timer will
advance to 11 hours & 59 minutes.
3. The display shows the timer countdown in minutes until
1 minute remains. Then the display will countdown in
seconds.
4. When the set time has run out, the timer will beep 3
times & will continue to beep 3 times every 60 seconds
until is pressed.
NOTE: The indicator light located above the pad will
glow while the minute timer is active.The minute timer does
not start or stop cooking. It serves as an extra timer in the
kitchen that will beep when the set time has run out. The
minute timer can be used alone or during any of the other
oven functions. When the minute timer is in use with any
other function, the minute timer will be shown in the display.
To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press &
hold the or to increase or decrease the time.
To Cancel the Minute Timer before the set time has
run out: Press .
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature
from 170°F to 550°F (77°C to 287°C).
To Set the Controls for Baking:
1. Press . "— — —" appears in the display.
2. Within 5 seconds, press the or . The display
will show "350°F (177°C)." By pressing & holding
the or , the temperature can then be adjusted
in 5°F increments (1°C if the control is set to display
Celsius).
3. As soon as the
or pad is released, the oven will
begin heating to the selected temperature. When the
displayed temperature reaches the desired baking
temperature, the preheat indicator light will turn OFF &
the control will beep 3 times.
4. To cancel baking, press