Filter
Top Products
5
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL
Broil
and CLEAN
Clean
pads control the Fahrenheit or Celsius temperature display modes. The oven control
can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display
in Fahrenheit. Note: both ovens will be changed at the same time.
INSTRUCTIONS PRESS DISPLAY
Consumer Defined Controls (continued)
To change display from Fahrenheit to Celsius
or Celsius to Fahrenheit
1. Press
Broil
and hold for 6 seconds. A beep will sound,
"---" will appear "UPPER" and "BROIL" will flash in the
display (Fig. 1). After 6 seconds a beep will be heard
and "F" (Fig. 2) or "C" (Fig. 3) will appear in the
display.
If "F" appears, the display is set to show temperatures
in Fahrenheit (Fig. 2). If "C" appears, the display is set
to show temperatures in Celsius (Fig. 3).
2. Press
Clean
to switch between Fahrenheit or Celsius
display modes. The display will show either "F" (Fig. 2)
or "C" (Fig. 3).
3. Press
START
to accept the change or press
Clear
/Off
to
reject the change.
Broil
for 6 seconds
Clean
START
or
Clear
/Off
Fig. 1
Fig. 2
Fig. 3
UPPER
ROAST
LOCKED
WARM
BAKE
DELAY
CONV
BROIL
TIMED
UPPER
TIMER
REMOVE
LOWER
DOOR
RACKS
CLEAN
CONV
BROIL
TIMED
WARM
BAKE
DELAY
DELAY
LOWER
LOWER
ROAST
LOCKED
LOCKED