Filter
Top Products
2
WARMER DRAWER
(some models)
(continued)
Downward PositionUpright Position
General Cleaning
To Remove and Replace Warmer Drawer
To Remove Warmer Drawer:
1. Turn power off before removing the warmer drawer.
2. Open the drawer to the fully opened position.
3. Locate the latches on both sides of the warmer drawer. The left latch is visible.
However, the right side is not and is located inside the drawer glides.
4. Pull up on the left glide latch while inserting a screwdriver over the right latch
and pushing down.
5. Pull the drawer away from the range.
6. To clean warmer drawer, gently scoure with a soapy scouring pad, this will
remove most spots. Rinse with a 1:1 solution of clear water and ammonia.
If necessary, cover difficult spots with an ammonia-soaked paper towel for 30
to 40 minutes. Rinse with clean water and a damp cloth, and then scrub with
a soap-filled scouring pad. Rinse and wipe dry with a clean cloth. Remove all
cleaners or the porcelain may become damaged during future heating. D O
NOT use spray oven cleaners on the cooktop.
To Replace Warmer Drawer:
1. Align the glide latches on both sides of the drawer with the slots on the drawer.
2. Push the drawer back into the range.
Pull up on left glide latch while
inserting a screwdriver over
the right latch and pushing
down.
Electrical Shock Hazard
can occur and result in
serious injury or death.
Disconnect appliance from electric power
before cleaning and servicing the warmer
drawer.
Arranging Warmer Drawer Rack Positions
Set the warmer drawer rack in the vertical position as shown below.
The rack can be used in 2 ways:
• In the upright position to allow low profile food items to be placed both under
and on top of the rack (for example, rolls or biscuits on top of the rack and a
casserole dish under).
• In the downward position to allow you to place light weight food items and
empty dishware (for example, rolls or pastries and dinner plates).
WARMER DRAWER