Filter
Top Products
13
Getting Water While Dishwasher
is Running
You can get water from the faucet while the
dishwasher is connected. However, avoid getting
water when the dishwasher is filling or draining.
1. Press red button on coupler to get the water
you want. The faucet is set on hot, adjust
faucet if you want cold.
2. Be sure hot water is turned back on all the way
to complete cycle.
Disconnecting the Portable/
Convertible Dishwasher
1. When cycle has finished, turn off hot water.
2. Press red button on coupler to release water
pressure being careful not to release coupler.
3. Press down on collar to release coupler.
4. Empty remaining water from coupler and
return it to compartment.
5. Unplug power cord and return it to
compartment.
IMPORTANT: A sink spray attachment hose can
burst due to constant water pressure while in use.
If your spray hose is installed on same water line
as the dishwasher, we suggest you disconnect the
sink spray attachment and plug the hole.
Connecting and Disconnecting the Portable/
Convertible Dishwasher (continued)
Fire Hazard/Electrical Shock
Do not use an adapter plug, extension
cord or remove grounding prong from
electrical power cord. Failure to follow
this warning can cause serious injury,
fire or death.
Electrical Connection for a Portable/
Convertible Dishwasher
An electrical supply of 120 volts, 60 Hz, AC only,
15 amps is required. For your safety, the
dishwasher must be grounded. If there is a
malfunction or breakdown, grounding will reduce
risk of electrical shock. This dishwasher has a
power cord with a 3-prong grounding plug. It must
be plugged into a mating 3-prong grounding type
receptacle, installed and grounded in accordance
with the National Electrical Code and any local
codes and ordinances.
Grounding type wall receptacle
Do not under any circumstances cut, remove
or bypass the grounding prong from this plug.
Power supply cord with 3-prong grounding
plug
Converting to Built-In
Your portable dishwasher can be converted to a
built-in (undercounter) model. A conversion kit
No. 154241302 is required and is available from
your local dealer or distributor. Instructions are
included with the kit.