Frigidaire 500 Series Dishwasher User Manual


 
4
Operating Instructions
Very Important
Information— Read Before
Operating Your Dishwasher!
Normal Operating
Sounds
This dishwasher does not sound like most
dishwashers—IT'S QUIETER!
The new wash system uses energy efficient
motors for the wash and drain portions of the
cycle you select. Each cycle has a series of
water fills and drains for washing and rinsing
dishes. As each cycle begins, you may–or
may not–hear the drain motor.
The next sound you will hear is the splashing
water as it enters the tub. Then the lower arm
rotates and circulates water. This is followed
by a pause and a slightly different sound as
the middle arm sprays water. If you listen
closely, you will hear the change in sound as
the wash action switches from one arm to
the other.
PLEASE BE ADVISED: If you compare
this dishwasher to previous models, you
may be surprised at what you DON'T
hear!
Model MDB531
Latch
Vent
Getting Started
1. Load dishwasher (See Preparing and
Loading Dishes).
2. Add detergent (See Dishwasher Dispenser
& Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Select desired cycle (See Wash Cycle
Selections).
5. Turn dial clockwise to select cycle or
number of hours for delay start.
6. Select desired energy OPTIONS (See
Energy Options).
7. For instructions on connecting the portable
dishwasher, see "Connecting and
Disconnecting the Portable/Convertible
Dishwasher."
8. If using DELAY START, go to step number
10.
9. Run hot water faucet nearest dishwasher
until water is hot. Turn water off.
10. To start, close door to latch.