Frigidaire 500 Series Dishwasher User Manual


 
15
Changing Color Panels (continued)
5. Arrange panel(s) so the desired color is
facing out. Place one side of panel(s)
under side trim and bow slightly until other
side fits under opposite trim. Push down to
make sure panel(s) and spacer are in
channel of divider trim strip.
6. Move complete panel assembly up by
pushing from sides and bottom of lower
panel. Check to make sure the color
panel(s) fit securely under control panel by
pressing in at top of color panel(s).
7. To change lower panel, use one hand to
hold upper panel assembly and divider trim
strip in place and use the other hand to
slide lower panel down until it clears
divider. Remove panel(s), arrange desired
color and replace per above directions for
upper panel. Do not remove foam spacer.
8. Replace bottom trim by fitting slot over
bottom edge of door and secure by
pressing from one side to the other. Note:
If trim does not go on easily, check to make
sure assembly is pushed all the way up
under the control panel and spacers and
panels are in channel of divider trim strip.
Customized Wood Panels
Your dishwasher can be customized with 1/4"
wood panels. Refer to your Installation
Instructions for more information.
Control
panel