Frigidaire 600 Series Dishwasher User Manual


 
14
Changing Color
Panels
Some models come with reversible door panel
inserts which offer three decorative colors.
To change the color panel:
1. Remove snap-on bottom trim by pulling
forward. Support color panel(s) at bottom
while removing trim. Slide color panel(s)
downward 1/2 ".
2. Grasp top and bottom of panels and bow
slightly until they are clear of trim. DO NOT
REMOVE SPACER.
3. Arrange panel(s) so desired color is facing
out. Place one side of panel under side trim
and bow slightly until other side fits under
opposite trim. Slide panel(s) up to fit under
control panel.
4. Replace bottom trim by fitting slot over
bottom edge of door and press to secure.
Customized Wood Panels
Your dishwasher can be customized with
1/4" wood panels. Refer to your installation
instructions for more information.
Cut Hazard
Metal door panels are sharp
and should be handled with
care. Wear gloves to protect
hands.
Failure to do so can result in
injury.
Bottom
Trim
Spacer
STEP 2
STEP 4
Color
Panel(s)
Side
Trim
Control Panel
Color Panel(s)
Color Panel(s)
Bottom
Trim
Bottom Edge of Door
STEP 1
STEP 3