Filter
Top Products
7
Operating Instructions (continued)
Options Selections
Hi-Temp Wash
When HI-TEMP WASH option is selected, the
dishwasher heats water in main wash to
approximately 140°F (60°C). Wash action will
continue but timer will not advance until proper
temperature is reached. This increase in water
temperature helps dishwasher detergent
remove food grease and soil from dishes more
effectively and aids in drying. HI-TEMP WASH
option can be used with any cycle except
RINSE & HOLD.
When HI-TEMP WASH option is selected, the
light above the pad will come on and remain
on until end of cycle. To turn off the HI-TEMP
WASH option, press the pad a second time.
The light above the pad will turn off.
Hi-Temp Rinse
When HI-TEMP RINSE option is selected, the
dishwasher heats the water in the final rinse to
approximately 140°F (60°C). This will speed
drying and reduce spotting. HI-TEMP RINSE
can be used with any cycle except RINSE &
HOLD.
When HI-TEMP RINSE is selected, the light
above the pad will come on and remain on
until end of cycle. To turn off the HI-TEMP
RINSE option, press the pad a second time.
The light above the pad will turn off.
No Heat Dry
NO HEAT DRY option saves electricity since
the heating element is off during the drying
portion of the cycle. When selected, the light
above the pad will come on and remain on
until end of cycle. To speed the drying process,
open the door slightly after the cycle is
complete. Some water droplets may remain on
door and in areas where dishes touch
silverware basket and rack.
To select heated dry, press the pad a second
time. The light above the pad will turn off.
Heated dry provides faster drying since the
heating element is on during the drying portion
of the cycle. With either option, a fan circulates
the air inside the dishwasher to speed drying.
You may see water vapor coming from the vent
during the drying portion of the cycle. The vent
is closed during washing to hold moisture and
sound inside and then opens for drying. The
drying option may be changed at any time
during the cycle and affects only the drying
period.
Note: Opening the door longer than one
minute during the drying cycle cancels the
selected dry program.
Delay Start
The DELAY START option allows you to delay
starting your dishwasher for either 3 or 6 hours.
Press the pad for the number of hours you
want to delay. The light above the pad will
come on and remain on while the timer counts
down to begin the cycle. To turn off the DELAY
START option, press the pad a second time.
The light above the pad will go off.
To cancel a DELAY START option and begin
the cycle before the delay period is over, press
the START/CANCEL pad.
Note: To start the dishwasher using the
same options selected on the previous
wash, just turn Selector Knob to desired
cycle and press the START/CANCEL pad.
Status Indicator Lights
When the ADD-A-DISH light is on, you can
add additional items.
The WASHING light comes on at the
beginning of cycle and remains on until the
end of the main wash.
The RINSING light will come on and remain
on during the last two rinses of all cycles.
The DRYING light indicates the drying portion
of the cycle. This light will come on when either
drying option is selected.
The CLEAN light will come on at the end of
cycle and remain on until door is opened.