Filter
Top Products
CLEANING AND CARE
Disconnect the power cord before cleaning or
leave t he door open to deactivat e t he oven during cleaning.
Wipe with a damp cloth. Dry thoroughly. Do not use cleaning
sprays, large amounts of
soap and water, abrasives or sharp
objects on the panel—they can damage it. Some paper towels
can also scratch the control panel.
It is important to keep the area clean where the door seals
against the microwave. Use only
mild, non-abrasive
detergents applied with a clean sponge or soft cloth. Rinse well.
If the cord becomes soiled, unplug and wash with a damp cloth.
For stubborn spots, sudsy
water may be used, but be certain
to rinse with a damp cloth and dry thoroughly before
plugging
cord into outlet.
To clean stainless steel surfaces, use a hot,
damp cloth
with a mild detergent suitable
for stainless steel surfaces.
Use a clean, hot,
damp cloth to remove soap. Dry with a
dry, clean
cloth.
If food soil remains, try a general kitchen
cleaner, such as
Fantastik
®
, Simple Green
®
or Formula 409
®
.
For hard-to-clean soil, use a standard
stainless-steel
cleaner, such as
Bon-Ami
®
or Cameo
®
.
Apply cleaner with a damp sponge. Use a
clean, hot,
damp cloth to remove cleaner.
Dry with a dry, clean cloth.
Always scrub
lightly in the direction of the grain.
After cleaning, use a stainless-steel polish,
such as
tainless Steel Magic
®
, Revere
Copper and Stainless Steel
Cleaner
®
or
Wenol All Purpose Metal Polish
®
. Follow the
product instructions for cleaning the
stainless-steel surface.
29
Control Panel and Door
Door Surface
Power Cord
Stainless Steel
Do not use a steel-wool pad;it will scratch the surface.