Filter
Top Products
5
Installation
Installation clearances:
• Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides - 3/8 inch
Top and Back - 1 inch
• Allow for trim kit if it to be installed with the unit.
This Use & Care Guide provides general operating
instructions for your model. Use the freezer only as
instructed in this Use & Care Guide. Before starting the
freezer, follow these important fi rst steps.
Location
• Choose a place that is near a grounded electrical
outlet. Do Not use an extension cord or an
adapter plug.
• If possible, place the freezer out of direct
sunlight and away from the range, dishwasher or
other heat sources.
• The freezer must be installed on a fl oor that is
level and strong enough to support a fully loaded
freezer.
• Consider water supply availability for models
equipped with an automatic ice maker. If you do
not hook up water to the freezer, remember to
turn the ice maker off.
CAUTION
DO NOT install the freezer where the temperature
will drop below 55°F (13°C) or rise above 110°F
(43°C). The compressor will not be able to maintain
proper temperatures inside the freezer.
DO NOT block the kick plate on the lower front of your
freezer. Suffi cient air circulation is essential for the
proper operation of your freezer.
NOTE
If your freezer is placed with the door hinge side
against a wall, you may have to allow additional space
so the door can be opened wider.
Freezer
3/8”
(10mm)
Required Tools
You will need the following tools:
INSTALLATION
NOTE
The exterior walls of the freezer may become quite
warm as the compressor works to transfer heat from
the inside. Temperatures as much as 30ºF warmer
than room temperature can be expected.