Frymaster 45 Fryer User Manual


 
2-29
ITEM PART # COMPONENT
1 230-1178 Metal Target Sides, Individual
2 230-1180 Metal Target Rear, Individual
Ignitor (see Section 2.14.3)
3 826-1155 Ignitor Kit, Optional Piezo
810-1001 Trigger/Ignitor
807-1906 Electrode Assembly
4 810-1862
Burner Manifold, Full-vat (full assembly including targets, 106-5075SP)
5
Ori ces (for high altitude and special gasses contact Frymaster)
826-1353 1.7 mm, Natural Gas (pkg. of 10)
826-1354 1.05 mm, Propane/Butane Gas (pkg. of 10)
810-0407 2.15 mm, Manufactured Gas
812-1203 1.00 mm, Butane Gas
6
Pilot Assemblies, Non-CE
810-1830 Natural Gas with Thermopile (Twin Push-on Terminals, 45) (Pro- 810-7773)
6A 106-1908SP Natural Gas with Thermopile (Twin Spade Terminals, 35)
6B 106-1909SP Pro./But. Gas with Thermopile (Twin Spade Terminals, 35)
810-0426 Natural Gas - Pilot Only (MJ45)
810-0427 Pro./But Gas - Pilot Only (MJ45)
Pilot Assemblies, CE and Export
806-8688SP Natural Gas with Thermocouple (Co-axial Lead)
106-9570 Natural Gas with Thermocouple Australia (Co-axial Lead)
106-1911 Natural Gas, Australian (Co-axial Lead)
810-2071 Natural Gas, mV
806-8689SP Pro./But. Gas with Thermocouple (Co-axial Lead)
106-9571 Pro./But. Gas with Thermocouple, Australia (Co-axial Lead)
106-1912 Pro./But. Gas, Australian (Co-axial Lead)
810-2070 Pro./But. Gas, mV
Burner Heat Shield Assemblies
7 823-5295
Filter Burner Position, Left (includes bracket, 210-9729)
823-5296
Filter Burner Position, Right (includes bracket, 210-9729)
823-0574
Non- lter Burner Position (includes bracket, 930-0075)
826-2109
Kit, Retro t Filter Lid (includes 823-5295 and 823-5296, see Page 2-29)
826-2110
Kit, Retro t Filter Lid, LH Spreader (includes 823-5295, see Page 2-29)
826-2111
Kit, Retro t Filter Lid, RH Spreader (includes 823-5295, see Page 2-29)
8
Thermopile/Thermocouple
810-2007 Pilot, Natural Gas
810-2022 Pilot, LP Gas
807-3485
Thermopile, Generator with Adaptor (for use with 810-2007, 810-2022) PMJ35
810-1873 Thermopile 1TT (Non-CE Pilot Assemblies, push on terminals) PMJ45
9 810-0705
Tube, Pilot Gas (Use with all burner assemblies except Hong Kong export units.)
812-0278
Tube, Pilot Gas (Use with Hong Kong export units only.)
10
Gas Valves, Non-CE (see note below)
807-1603 mV Natural Gas
807-4137 mV Natural Gas (Australia) also requires kit 807-1846
807-1604 mV Propane Gas
807-3294 24V Natural Gas (for 240V, use 807-0025)
807-3295 24V Propane Gas (for 240V, use 807-0759)
810-0786 E. I. Natural
810-0787 E. I. Propane
* 810-0691 Tube, Vent
NOTE: A gas valve capacitor (P/N 806-4781) is required on gas valves used on units with thermostat controllers.